3D composites fabric

  • ¡Ü 3D spacer fabrics
  • 3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries.
  • 3D spacer fabrics

  • 3D glass fabrics

  • 3D basalt fabrics

  • 3D carbon/glass hybrid fabrics

  • - Product Characteristics -
  • The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction.
    The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced.
    The range of the pillar height:3-50 mm, the range of the width:¡Â3000 mm.
    The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible.
    The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.

top

    ¡Ü 3D spacer fabric sandwich composite

  • 3D spacer fabrics sandwich composite

  • 3D spacer fabrics sandwich composite
  • 3D spacer fabrics sandwich composite

Pillar Height mm 4.0 6.0 8.0 10.0 12.0 15.0 20.0
Warp Density root/10cm 80 80 80 80 80 80 80
Weft Density root/10cm 96 96 96 96 96 96 96
Face Density 3-D spacer fabrics kg/m2 0.96 1.01 1.12 1.24 1.37 1.52 1.72
3-D spacer
fabrics and
sandwich
construction
kg/m2 1.88 2.05 2.18 2.45 2.64 2.85 3.16
Flatwise Tensile
Strength
MPa 7.5 7.0 5.1 4.0 3.2 2.1 0.9
Flatwise Compressive
Strength
MPa 8.2 7.3 3.8 3.3 2.5 2.0 1.2
Flatwise Compressive
modulus
MPa 27.4 41.1 32.5 43.4 35.1 30.1 26.3
Shear Strength Warp MPa 2.9 2.5 1.3 0.9 0.8 0.6 0.3
Weft MPa 6.0 4.1 2.3 1.5 1.3 1.1 0.9
Shear modulus Warp MPa 7.2 6.9 5.4 4.3 2.6 2.1 1.8
Weft MPa 9.0 8.7 8.5 7.8 4.7 4.2 3.1
Bending Rigidity Warp N.m2 1.1 1.9 3.3 9.5 13.5 21.3 32.0
Weft N.m2 2.8 4.9 8.1 14.2 18.2 26.1 55.8

  • Note: The above performance index for information purposes only, based on the user's performance requirements, 3D spacer fabric reinforcement structure can be designed.

top